|
|
 |
FS-8000
Aquarium Direct Flow RO/DI system
Removes up to 99.99% of all impurities - including
silicates - for clean, clear aquarium
Unlimited direct flow !!
|
Aquarium RO/DI system
Small in size, but big in capacity.
Perfect for large aquariums.
Designed for commercial and
residential.
Using Reverse Osmosis Technologies.
No equipment is more effective in helping create ideal
water conditions as Reverse Osmosis (RO) units. These units filter out
up to 99% of chemicals found in tap water by forcing tap water through a
semi-permeable membrane
that removes 90-99% of tap water impurities.
Unlimited
Direct Flow
Enjoy an unlimited flow of fresh
purified water with the PurePro FS8000-Direct Flow RO/DI system.
System is equipped with
high flow booster pump
for increased water production capacity.
It is perfect for areas with low water pressure. Integrated
diaphragm pump increases water pressure to maximize production without
having to purchase a separate RO pump.
Deionization
(DI)
filters
De-mineralize
filter takes the full size RO to a higher level of filtration. It is an excellent selection for
reef enthusiasts and other serious aquarists, especially those who live
in areas with exceptionally high levels of phosphates in their tap
water. Our unit includes: sediment pre-filters, carbon pre-filters and TFC
(Thin Film Composite) membrane, Deionization
(DI) post-filters in clear housings. The
post deionizer takes the small percentage of contaminants that the
membrane could not remove and filters this to greater than 99.99% pure.
It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm
or resistivity of close to 18 meg.ohm (click
here for more
information)
Why do I need RO water ?
Tap water often contains
impurities that can cause problems when added to an aquarium. These
include phosphate, nitrate, chlorine, and various heavy metals. High
levels of phosphate and nitrate fuel aggressive algae growth, and
copper, often present in tap water due to leaching from pipes, is highly
toxic to invertebrates. Because RO filters remove practically all of
these impurities, they are becoming more popular among aquarists,
particularly marine hobbyists. (please click
here for more information)
Features:
-
2 x
200GPD Membrane
-
High
Flow Booster Pump
-
Reverse
Osmosis Technologies
-
Easy to
Use and Store
-
Three
Color Coded Tubing For System Connection.
-
Include Faucet Adaptor For Easy
Installation.
-
100% Factory Tested and Sterilized.
-
Include Installation Instruction.
Deionization
(DI) Filter.
Pressure Gauge
FS-8000 cartridge filters
-
(Stage
1) 5 Micron Sediment Filter :
With only five micron
rating. It is effective in removing dirt, rust and sand particles.
-
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the
chlorine and organic chemicals. It provides enhanced reduction of
taste, odor, and color. Protect and prolong
the life of membrane.
-
(Stage
3) Carbon Block Filter:
It takes out 99% of the
chlorine and organic chemicals. It provides enhanced reduction of
taste, odor, and color. Protect and prolong
the life of membrane.
-
(Stage
4) Reverse Osmosis Membrane:
It remove
the following hard water contaminants that may be present in your
water: lead, cooper, barium, chromium, mercury, sodium, cadmium,
fluoride, nitrite, nitrate, and selenium.
-
(Stage
5) Deionization (DI) Filter:
Produce 99.99% pure water by simply attaching
this convenient deionization filter with RO unit. Convenient post RO
filtration DI unit (RO/DI unit) provides crucial supplemental
filtration to remove most impurities for pure polished product
water. Excellent in areas with hard water. Produce 99.99% pure
water. It will give you
0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity
of close to 18 meg.ohm
Specifications:
Production: 400 GPD / 1512 LPD
Minimum Operation pressure: 10 psi
Available in : 110 volt, 220volt, 240volt. ( 50 / 60 Hz)
Dimensions: (cm)38 (L) x 46 (H) x 25.5 (W) - system
Weight: 13.8 kg - system
Frequently Asked Question
Typical Aquarium
RO systems:
|
